Fortnite

Fortnite game profile for best-preset configuration for mouse and keyboard.

DO NOT run any scripts or GamePacks until you are happy with your mouse movement as they can have an adverse effect on performance if not designed correctly for mouse and keyboard use.

Info: When following this guide we recommend setting the DPI of your mouse to 4000.

If playing on console it is recommended to set the Polling Rate to 250 and 1000 if playing on PC.

If you prefer to use a different DPI you will need to adjust the sensitivity in MK Settings to compensate for a different mouse DPI. A lower DPI will require a raised sensitivity while a high dpi would benefit from a lower sensitivity.

To get the best experience playing Fortnite you will need to go into your In-Game "Controller Options" and set a few settings before playing. Using the following settings will allow for a 1 : 1 PC-like feel and allow quick movements.

In-Game Settings

Once in "Controller Options" match the following settings below to your In-Game settings.

  • Look Horizontal Speed - 100
  • Look Vertical Speed - 100
  • Turning Horizontal Boost - 0
  • Turning Vertical Boost - 0
  • Turning Boost Ramp Time - 0
  • ADS Look Horizontal Speed - 100
  • ADS Look Vertical Speed - 100
  • ADS Turning Horizontal Boost - 0
  • ADS Turning Vertical Boost - 0
  • ADS Turning Boost Ramp Time - 0
  • Look Dampening Time - 0
  • Look Input Curve - Linear
  • Right Stick Deadzone - 5%
Document image
Document image

Zen Studio M&K Settings

Next, you will need to open up Zen Studio and click the M&K Settings which is located at the top right of Zen Studio all the way to the right. The first thing to do once in M&K Settings is to assign the button mapping settings. This is a matter of personal preference though you will want to ensure that each button for the controller has at least one keyboard key or mouse key assigned to it. Each profile does have the ability for secondary binds along with 4 optional auxiliary profiles should you want custom settings for a specific scenario.

To set a bind, double click the button you want to bind then press the key or mouse button you wish to use as the bind. Should you make a mistake and want to cancel a bind press and hold the Escape key on your keyboard. A bind can also be cleared by holding the Backspace key on your keyboard.

Important: Binds for mouse and keyboard can be done with the mouse and keyboard connected to your PC, Zen, and even laptop keyboard. It is important to note though that should you want to either cancel or clear a bind you will need to use a keyboard connected to your PC or laptop keyboard. Using a keyboard connected to the Zen will not cancel or clear a bind.

Next match the following settings

  • Tuning - Sensitivity 50.00
  • Tuning - X/Y Ratio 1.00
  • Tuning - Boost 0.00
  • Tuning - Smoothness 0
  • Translator - Deadzone Compensation X 7.00 (XBOX) 5.00 (PLAYSTATION)
  • Translator - Deadzone Compensation Y 7.00 (XBOX) 5.00 (PLAYSTATION)
  • Translator - Deadzone Shape COD
  • Translator - Analog Stickize 142.00

The ballistic curve can be left as is. Should you want a more customized feel though we recommend going into a Creative Map such as an Aim Training map or your Creative Island to adjust the curve and test out movement. Below is a curve that many of our testers enjoyed. This allows for quick and smooth movement while also giving a nice boost to the in game Aim Assist. The Tuning and Translator settings above can also be set by copying the appropriate code and then click paste in Zen Studio.

Tuning
|
TRANSLATOR PLAYSTATION
|
TRANSLATOR XBOX
|
BALLISTIC CURVE
|
BUTTON MAPPING
|

Download Profile

Info: The above process will need to be done at least once for both the Hip and ADS profile. Auxiliary profiles are optional.

Once you have finished and got everything where you like it to be save the settings to your Zen by clicking the glowing checkmark in a circle on the left of the screen and you are all set. It is recommended to set up 2 auxiarlly profiles and assign the activation for one your Switch Mode Button and the other your Edit Button that will be in use and set the curve to Default.

Should you want to do double movements after setting up your profile copy and paste the code below into a new gpc file, save then program to your Zen.

GPC
|
Document image

Instant Reset Trick - No GPC Required!

A popular mod in many GamePacks and scripts is Instant Reset / Insta Reset. This can be done in a few ways using the new M&K Settings. The easiest way though is simply click the Secondary tab then map the In-Game button for Reset and Confirm to the same button. Using a secondary bind also you to use the Primary binds to function like normal and the Secondary binds allow you to instantly reset a build using a separate keyboard or mouse key!



Updated 13 May 2022
Did this page help?
Yes
No