How to setup Chiaki on Windows

Download the client

https://git.sr.ht/~thestr4ng3r/chiaki/refs/download/v2.1.1/Chiaki-v2.1.1-Windows-x86_64.zip

Extract the zip

Go to your downloads folder and right click the Chiaki zip Click on extract all



Open Chiaki

Once extracted open the folder and double click on the Chiaki EXE



Chiaki Settings

With Chiaki open press the little gear icon at the top right



Make sure the resolution is set to 360p and close the settings screen



Connecting the Zen to your PC

First always make sure your Zen is fully up to date. Instructions to update can be found at UPDATE & INSTALL

1. Connect your controller of choice to port A3 (Front Left)
2. Connect the Zen to your pc using the PROG port (Port on the right side)
3. Open Zen Studio and go to the Device tab
4. Select PC or Xbox 360 as output protocol (Make sure ps4 specialty mode is not enabled!)
5. Connect the Zen to your pc using the CONSOLE port (Micro USB on the back)
6. Test if your controller is connected to your pc using this site (https://gamepad-tester.com/)

PS5 Settings

Enable remote play on your PS5 1. Open settings using the gear icon in the top right in the PS5 home screen



2. Go to System then Remote Play 3. Enable Remote Play



4. Go to Link Device



5. Remember or write down this code (This code will expire in 300 seconds)



Register the PS5 in Chiaki

You need to register the console in Chiaki For this you will need a Account ID We will obtain this id using the Cronus Discord Bot 1. Join the discord server if you didn't already (http://discord.gg/cronuszen)



2. On the right click on the Cronus bot and click on the profile picture



3. Then click on Send Message



4. With the direct message window open type .psn 5. Click on the blue link this will open your default browser 6. Login to your Playstation account 7. After you logged in you will be redirected to a white page. Copy the URL of this page. 8. Send .psn <URL> Replace <URL> with the actual URL your copied in step 7 Keep in mind that there needs to be a space in between the command and the URL 9. The bot will send you your Account ID Copy the id in box on the right 10. With Chiaki still open you will now see that your console has been detected. Double click on your console



11. Insert your ID from step 9 in the PSN-Account-ID box



12. Insert your Remote Play pin you obtained from your PS5 in the PIN box



13. With everything filled out press Register 14. A new window will pop up. Press OK



15. Now you can double click on your PS5 And this will open up the session