Rainbow 6

Rainbow 6 game profile for best-preset configuration for mouse and keyboard.

DO NOT run any scripts or GamePacks until you are happy with your mouse movement as they can have an adverse effect on performance if not designed correctly for mouse and keyboard use.

Info: When following this guide we recommend setting the DPI of your mouse to 4000.

If playing on console it is recommended to set the Polling Rate to 250 and 1000 if playing on PC.

If you prefer to use a different DPI you will need to adjust the sensitivity in MK Settings to compensate for a different mouse DPI. A lower DPI will require a raised sensitivity while a high dpi would benefit from a lower sensitivity.

To get the best experience playing Rainbow 6 Siege you will need to go into your In-Game "Controls" options and set a few settings before playing. Using the following settings will allow for a 1 : 1 PC-like feel and allow quick movements.

In-Game Settings

Once in "Controller Options" match the following settings below to your In-Game settings.

  • Horizontal Sensitivity - 100
  • Vertical Sensitivity - 100
  • Left Stick Dead Zone (%) - 5
  • Right Stick Dead Zone (%) - 5
  • Controller Rotation - Updated
Document image

Zen Studio M&K Settings

Next, you will need to open up Zen Studio and click the M&K Settings which is located at the top right of Zen Studio all the way to the right. The first thing to do once in M&K Settings is to assign the button mapping settings. This is a matter of personal preference though you will want to ensure that each button for the controller has at least one keyboard key or mouse key assigned to it. Each profile does have the ability for secondary binds along with 4 optional auxiliary profiles should you want custom settings for a specific scenario.

To set a bind, double click the button you want to bind the press the key or mouse button you wish to use as the bind. Should you make a mistake and want to cancel a bind press and hold the Escape key on your keyboard. A bind can also be cleared by holding the Backspace key on your keyboard.

Important: Binds for mouse and keyboard can be done with the mouse and keyboard connected to your PC, Zen ,and even laptop keyboard. It is important to note though that should you want to either cancel or clear a bind you will need to use a keyboard connected to your PC or laptop keyboard. Using a keyboard connected to the Zen will not cancel or clear a bind.

Next match the following settings

  • Tuning - Sensitivity 10.00
  • Tuning - X/Y Ratio 1.00
  • Tuning - Boost 0.00
  • Tuning - Smoothness 0
  • Translator - Deadzone Compensation X 17.00 (XBOX) 12.00 (PLAYSTATION)
  • Translator - Deadzone Compensation Y 17.00 (XBOX) 12.00 (PLAYSTATION)
  • Translator - Deadzone Shape COD
  • Translator - Analog Stickize 142.00

The ballistic curve can be left as is. Should you want a more customized feel though we recommend going into a Solo match or custom game to adjust the curve and test out movement. The Tuning and Translator settings above can also be set by copying the appropriate code and then click paste in Zen Studio.

TUNING
|
TRANSLATOR
|
BUTTON MAPPING
|
BUTTON MAPPING
|

Download Profile

Info: The above process will need to be done at least once for both the Hip and ADS profile. Auxiliary profiles are optional.

Once you have finished and got everything where you like it to be save the settings to your Zen by clicking the glowing checkmark in a circle on the left of the screen and you are all set.

Document image