STEP 1: Update Firmware

Let's get started with updating your Cronus Zen to the latest firmware. 
We're deep in our Beta Cycle, and while our primary focus with Firmware ﻿ is enhancing the experience for PS5 users, it's been rigorously tested on platforms like Xbox Series X|S, Nintendo Switch, & PS4. 
Should you encounter any issues when using the latest ﻿ firmware that were not present in the earlier 2.1.0 Beta 50, we provide the option to easily rollback to the previous firmware. Click here﻿ for more info.
Video Walkthrough
﻿
This video walks you through updating to the latest firmware using the tools on this page.
﻿
Cronus Zen Port & Button Names
﻿
Step-By-Step
﻿
1
Download Beta.68 Firmware Tool
﻿
2
Plug your Cronus Zen into a computer using the CONSOLE/PC USB port.
Cronus Zen - CONSOLE/PC USB Cable to PC
﻿
3
Press and hold Zen's blue reset button until the OLED screen displays 'Zen Bootloader'. 
Note: If the screen is blank, unfortunately the Zen is faulty and needs to be replaced.
4
Open the ﻿ Firmware Tool and your Zen should be displayed. Click on it.
NO DEVICES FOUND
If the firmware tool displays No Devices Found or some other error, see the Firmware Troubleshooting Guide﻿.
No Devices Found
﻿
5
Hit 'Begin Update'. In 18 secs, your Zen will be rocking ﻿.👌
<div align="center">
<video width="600" height="300" autoplay loop muted>
    <source src="https://archbee-doc-uploads.s3.amazonaws.com/IwUlH55FdaPsVELSqm1Fc/41zziio7WCQXYLDE2D2tN_programbeta68firmware.mp4" />
</video>
</div>
<div align="center">
<video width="600" height="300" autoplay loop muted>
    <source src="https://archbee-doc-uploads.s3.amazonaws.com/IwUlH55FdaPsVELSqm1Fc/41zziio7WCQXYLDE2D2tN_programbeta68firmware.mp4" />
</video>
</div>
﻿
6
Unplug the rear CONSOLE/PC USB cable from the Zen. Keep it connected to the PC for STEP 2: Install Zen Studio﻿﻿
Known Issues
Known Issues Last Updated: Sept 18th 2023
Known Issue
Connecting a controller may sometimes cause an E3 error code.
Solution: Unplug all cables from Zen then try again.
Known Issue
Mac users who have installed Windows using Bootcamp may receive a "No Devices Found" message. It depends on the chipset/MacOS version. Unfortunately we're unable to offer Mac support.
Known Issue
XB1_SHARE can not be set in GPC scripts. Assigning any value to it will always output as 0.
Known Issue
set_ps4_lbar() not working with a wireless connection (works with USB).
Known Issue
When compiling a script that includes constant arrays, they will not be included in the compiled code directly. Instead they are turned into functions which call their values from the data segment.
Known Issue
Scripts using PIO_PS4 made for firmware Beta.50 and older, will now need to use PIO_PS5 instead for gaming on the PlayStation 5.
Known Issue
uint16 arrays are not currently supported. This will likely cause older scripts to malfunction. This doesn't affect GamePacks.
﻿
﻿

Quick Start Guide

STEP 2: Install Zen Studio

Docs powered by Archbee

TABLE OF CONTENTS

Video Walkthrough

Step-By-Step

Known Issues