This expert Game Profile for Naraka: Bladepoint has optimum out-of-the-box presets for Mouse & Keyboard, providing a 1:1 PC-like feel when gaming on Xbox, PlayStation, or Switch. You can also use Mouse & Keyboard on a PC with Cronus Zen, giving you full access to the latest MODs via GamePacks & Scripts.
Notice of Non-Affiliation and Disclaimer
We are not affiliated, associated, authorized, endorsed by, or in any way officially connected with Naraka: Bladepoint, 24 Entertainment, or any of its subsidiaries or its affiliates. The official Naraka: Bladepoint website can be found at http://www.narakathegame.com/. The names Naraka: Bladepoint and 24 Entertainment, as well as related names, marks, emblems, and images, are registered trademarks of their respective owners.
The EULA of this game may prohibit you from using third-party devices, scripts, mods, and macros, therefore, use GamePacks & Scripts at your own risk.
Our favorite "In-House Mouse" is the Logitech G502, and is what we use as a baseline for all MK Game Profiles. If you prefer to use a different DPI, you will need to adjust the TUNING > SENSITIVITY in M&K Settings to compensate. A lower DPI will require a raised sensitivity while a higher dpi would benefit from a lower sensitivity.
When following this guide, we recommend setting the DPI of your mouse to 4000 (you can tune to a higher DPI once you've got this profile setup).
If playing on console it is recommended to set the Polling Rate to 250 and 1000 if playing on PC. If you prefer to use a different DPI, you will need to adjust the sensitivity in MK Settings to compensate for a different mouse DPI. A lower DPI will require a raised sensitivity while a high dpi would benefit from a lower sensitivity.
You can find out more when you get to Step 3 - Advanced Tuning.
Mouse: Logitech G502 DPI: 4,000 Polling: 250Hz (Xbox/PlayStation) or 1000Hz (Windows PC)
To get the best experience playing Naraka: Bladepoint you will need to go into your In-Game "Options" and set a few settings before playing. Using the following settings will allow for a 1:1 PC-like feel and allow quick movements.
Once in "Options" match the following settings below to your In-Game settings.
- Horizontal View Sensitivity: 150 (Madness)
- Vertical View Sensitivity: 150 (Madness)
- Horizontal View Sensitivity (ADS): 150 (Madness)
- Vertical View Sensitivity (ADS): 150 (Madness)
- Turning Horizontal Boost: 0 (None)
- Turning Vertical Boost: 0 (None)
- Turning Horizontal Boost (ADS): 0 (None)
- Turning Vertical Boost (ADS): 0 (None)
- Deadzone: 10%
- Outer Threshold: 3%
- Turning Ramp-up Time: 0
Zen Studio M&K Settings
Next, you will need to open up Zen Studio and click the M&K Settings which is located at the top right of Zen Studio all the way to the right. The first thing to do once in M&K Settings is to assign the button mapping settings. This is a matter of personal preference though you will want to ensure that each button for the controller has at least one keyboard key or mouse key assigned to it. Each profile does have the ability for secondary binds along with 4 optional auxiliary profiles should you want custom settings for a specific scenario.
Binds for mouse and keyboard can be done with the mouse and keyboard connected to your PC, Zen, and even laptop keyboard. It is important to note though that should you want to either cancel or clear a bind you will need to use a keyboard connected to your PC or laptop keyboard. Using a keyboard connected to the Zen will not cancel or clear a bind.
To set a bind, double click the button you want to bind then press the key or mouse button you wish to use as the bind. Should you make a mistake and want to cancel a bind press and hold the Escape key on your keyboard. A bind can also be cleared by holding the Backspace key on your keyboard.
Next match the following settings
- Tuning - Sensitivity 16.00
- Tuning - X/Y Ratio 1.05
- Tuning - Boost 0.00
- Tuning - Smoothness 0
- Translator - Deadzone Compensation X 11.07 (Xbox) or 10.07 (Playstation)
- Translator - Deadzone Compensation Y 11.07 (Xbox) or 10.07 (Playstation)
- Translator - Deadzone Shape Ellipse
- Translator - Analog Stickize 142.00
The above process will need to be done at least once for both the Hip and ADS profile. Auxiliary profiles are optional.
Once you have finished and got everything where you like it to be save the settings to your Zen by clicking the glowing checkmark in a circle on the left of the screen and you are all set.