Chiaki4Deck Remote Play
Cronus Zen supports the open-source Chiaki4Deck PS REMOTE PLAY software for the PlayStation 5. This is a fork of the client Chiaki which we also support.
Go to your downloads folder and right click the Chiaki4deck-win_x64-MSYS2-Release.zip Click on extract all
Next you will find another zip (I know why double but we didnt pack this :P) Do the same with the file called Chiaki4deck-Win.zip
Once extracted open the folder and double click on the Chiaki EXE
With Chiaki4Deck open press the little gear icon at the top right
Make sure the resolution is set to 360p and fps to 60.
Now we need to enable all those fancy ps5 features. Go to the general tab and enable the PS5 Features.
Now you can close the settings screen by clicking the arrow on the top left.
First always make sure your Zen is fully up to date. Instructions to update can be found at UPDATE & INSTALL
- Connect your PS5 controller to port A1 (Left side)
- Connect the Zen to your pc using the PROG port (Port on the right side)
- Open Zen Studio and go to the Device tab
- Select AUTO output protocol (Make sure ps4 specialty mode is not enabled!)
- Connect the Zen to your pc using the CONSOLE port (Micro USB on the back)
Enable remote play on your PS5 1. Open settings using the gear icon in the top right in the PS5 home screen
2. Go to System then Remote Play 3. Enable Remote Play
4. Go to Link Device
5. Remember or write down this code (This code will expire in 300 seconds)
With Chiaki4Deck still open and on the start screen you will see your ps5 displayed here. If you do not make sure you are on the same network as your ps5.
Simply click on the ps5.
Press the PSN Login button
Now you simply need to enter your PSN username.
As you can see your account id was filled in for you. The last thing we need to do is to enter the pin we got from the ps5 settings steps above. Now you can click on register in the top right.
Just click on your ps5 in the list again and you are ready to game :)